This fire fighting project is located in Faysalabad - Pakistan. This plant is the first investment of Hayat Group in Pakistan. Acting as...

My cockpit cabin design is based on a wooden / timber based construction with final finishing cladddings implemented only from the...

I have designed and manufactured my throttles back in 2004 as seen at this link. The initial design was plastic levers without reverse...

The PRS (pressure reduction station) for the Canadian gas grid is completed successfully in Gebze workshop in Turkey. As reported...

Below is the list of desktop PC's and their configurations (CPU,RAM and Graphics Card) and the simulator components that are running on...

Before having a 3D printer, I used to make my "korry like" buttons using microswitches, Kingbright DE/2ID type led bars and some small...

I designed and manufactured my throttle levers back in 2004. Below are some photos from the design phase, manufacturing phase and...

The project for the installation, commisioning and heat load testing for 20 nos. of 150 kW air-to-air cooling system (total of 3 MW...

Our project for the installation, commisioning and heat load testing for 20 nos. of 150 kW Air to Air cooling system has begun recently....

This project is from 1998, where I designed, manufactured and installed a special purpose crane for the manufacturing of the inverse...

As a junior engineer freshly graduated from university, my first construction project abroad (away from Istanbul) was in Mersin Turkey,...

This was my first ever engineering project which was the design, manufacturing and construction of a stainless steel chimney for a...

This project is located in Aydın, Turkey. It was completed and commisioned in 2012. I was the acting project and construction manager for...

This project is located in Umraniye - İstanbul. It was a fit out project where the car parking area located at the basement of a building...

I've already published a short guide on how I make produce my korry type buttons. There is even a short video on my youtube channel on...

This project is located in Ain Al-Sokhna - Egypt near the red see. The plant is the second biggest investment of Hayat Group in Egypt...

Self made MIP Panels masking LCD displays behind them. Flood lights by halogen lamps. Dummy footrests designed and manufactured by...

#simulation #flightsimulation #engineering #engineerslife #airbus #a320 #airbusa320 #design #construction #progress #turkey #turkish...

Here is a short video of the APU start procedure for the A320 (this one is from projectmagenta) I am trying jeehell lately. I will also...

The video below shows the procedure turn after the Middle Marker point with checkerboard visuals on the left cockpit window. #simulation...